摘要Urban expressways can be built with various patterns, resulting in complex traffic conversions. In practice, implementing identical design control parameters under different patterns or traffic conditions is unreasonable, and further analysis is therefore necessary to improve the flow of traffic. Control parameters, regardless of whether they are reasonable, affect the safety and efficiency of urban expressways. Design speed and minimum curve radius are the control parameters of the ramp. Acceleration/deceleration lane length and width-transition length are the control parameters of the speed-change lane. The factors influencing the control parameters of the ramp and the speed-change lane can be determined by analyzing the characteristics of the entrance/exit. To elucidate the mechanism of effects of the design speed and the stopping sight distance on the minimum ramp radius, the effects of traffic flow rate and ramp design speed on the length of the speed-change lane and the width-transition were analyzed. Calculation models for the control parameters of the ramp and the speed-change lane were established based on kinematics theory, traffic flow theory, and probability theory. The following conclusions can be drawn from the analysis and calculation. The design speed of the ramp can be classified according to ramp patterns and the properties of urban roads connected by ramps on both ends. The minimum curve radius of the structure pattern ramp that meets the requirement of the stopping sight distance is greater than that determined by the side-way force coefficient. The calculated lengths for the two-lane acceleration lane and the width-transition under traffic flow are greater than that demanded by the current specifications.
Abstract：Urban expressways can be built with various patterns, resulting in complex traffic conversions. In practice, implementing identical design control parameters under different patterns or traffic conditions is unreasonable, and further analysis is therefore necessary to improve the flow of traffic. Control parameters, regardless of whether they are reasonable, affect the safety and efficiency of urban expressways. Design speed and minimum curve radius are the control parameters of the ramp. Acceleration/deceleration lane length and width-transition length are the control parameters of the speed-change lane. The factors influencing the control parameters of the ramp and the speed-change lane can be determined by analyzing the characteristics of the entrance/exit. To elucidate the mechanism of effects of the design speed and the stopping sight distance on the minimum ramp radius, the effects of traffic flow rate and ramp design speed on the length of the speed-change lane and the width-transition were analyzed. Calculation models for the control parameters of the ramp and the speed-change lane were established based on kinematics theory, traffic flow theory, and probability theory. The following conclusions can be drawn from the analysis and calculation. The design speed of the ramp can be classified according to ramp patterns and the properties of urban roads connected by ramps on both ends. The minimum curve radius of the structure pattern ramp that meets the requirement of the stopping sight distance is greater than that determined by the side-way force coefficient. The calculated lengths for the two-lane acceleration lane and the width-transition under traffic flow are greater than that demanded by the current specifications.
莫阳. 城市快速路匝道及变速车道控制参数研究[J]. Journal of Highway and Transportation Research and Development, 2017, 11(2): 78-90.
MO Yang. Control Parameters for the Ramp and Speed-change Lane of Urban Expressways. Journal of Highway and Transportation Research and Development, 2017, 11(2): 78-90.
[1] ZHU Sheng-yue. Study on Establishment at the Exit and Entrance of Urban Expressway[J]. Journal of Urban Transport of China,2004,4(2):59-63.
[2] ZHAN Lin-xia. Study on Factors affecting the Access of Urban Expressway[D]. Beijing:Beijing University of Technology,2008.
[3] WANG Yang. Study on the Relationship between the Access of Urban Expressway and Bus Station based on Micro-Simulation[D].Beijing:Beijing University of Technology,2010.
[4] YANG Xiao-guang,XU Jian,ZHU Tong. Minimum Spacing between Bus Station and Entrance/Exit on Urban Expressway[J]. Journal of Transportation Information and Safety,2010,28(2):1-7,27.
[5] CJJ129-2009, Specification for Design of Urban Expressway[S].
[6] JTG B01-2014, Technical Standard of Highway Engineering[S].
[7] JTG D20-2006, Design Specification for Highway Alignment[S].
[8] CJJ37-2012, Code for Design of Urban Road Engineering[S].
[9] CJJ193-2012, Code for Design of Urban Road Alignment[S].
[10] HUANG Xing-an. Manual for Design of Highway and Urban Road[M]. Beijing:China Architecture & Building Press,2005.
[11] DAI Ji-feng,MA jian-xiao. Generality of Traffic Engineering[M]. Beijing:China Communications Press,2006.
[12] LÜ Ji-er,ZHU Liu-hua,ZHENG Rong-sen, et al. Effects of Driver's Reaction Time on Safe Driving[J]. Journal of Transportation Systems Engineering and Information Technology,2014,14(2):80-86.
[1]
李高盛, 彭玲, 李祥, 吴同. 基于LSTM的城市公交车站短时客流量预测研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 65-72.
[2]
胡宝雨, 赵琥, 孙祥龙, 王弟鑫, 刘宁. 城市公交与农村客运同步换乘模型研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 73-79.
[3]
郭建科, 邱煜焜, 白家圆, 王利. 基于城市公共交通可达性的医疗服务空间分异及均等化研究——以大连市为例[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 80-89.
[4]
赵妮娜, 赵晓华, 林展州, 葛书芳. 主线分流互通立交指路标志版面形式研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 90-102.
[5]
姜明, 陈艳艳, 冯移冬, 周瑞. 路侧示警桩设置关键指标研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 79-87.
[6]
蔡静, 刘莹, 张明辉. 京津冀货物运输结构调整策略研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 88-93.
[7]
常云涛, 王奕彤. 连续流交叉口信号配时优化模型[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 66-74.
[8]
林丽, 冯辉, 朱泳旭. 基于Ring-Barrier相位的干线公交协调控制[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 85-91.
[9]
胡祖平, 何建佳. 基于网络可靠性的街区开放适宜度研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 51-58.
[10]
陈红, 马晓彤, 赵丹婷. 基于元胞自动机的破损路面车辆换道仿真研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 75-84.
[11]
李新, 毛剑楠, 骆晨, 刘澜. 基于MFD的路网可扩展边界控制方法研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 59-65.
[12]
郝丽, 胡大伟, 李晨. T-JIT环境下企业供应链中采购管理供应商选择和订单分配研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(3): 80-89.
[13]
姚佼, 徐洁琼, 倪屹聆. 城市干道多时段协调控制优化研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(3): 60-70.
[14]
潘兵宏, 余英杰, 武生权, 严考权. 基于UC-win/Road仿真的高速公路出口预告标志前置距离研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(3): 71-79.
[15]
何南, 李季涛. 考虑运输方式间影响关系的公路客运交通需求预测[J]. Journal of Highway and Transportation Research and Development, 2018, 12(3): 90-96.
2017, Vol. 11 
