摘要The accuracy of safety speed is insufficient because the grandeur of a vehicle is oversimplified by the curve-safety-speed calculation method, which plays a core decision-making role in the current curve-speed warning control system. Based on the nonlinear characteristic of tire and dynamic stiffness of suspension, the vehicle dynamic model with TruckSim was built by using an 8-meter-long full-load bus as the research object. The orthogonal simulation experiment of driving speed to different radii was conducted, and the mathematical response surface model of safety speed to curve radius was established. Finally, the critical speeds of the mathematical model calculation and the simulation test were compared under the same bend radius. Results show that the mathematical response surface model is a reasonable and accurate calculation method for calculating the safety speed of a vehicle that is turning on a curve. This model benefits the enhancement of vehicle active safety control technology.
Abstract：The accuracy of safety speed is insufficient because the grandeur of a vehicle is oversimplified by the curve-safety-speed calculation method, which plays a core decision-making role in the current curve-speed warning control system. Based on the nonlinear characteristic of tire and dynamic stiffness of suspension, the vehicle dynamic model with TruckSim was built by using an 8-meter-long full-load bus as the research object. The orthogonal simulation experiment of driving speed to different radii was conducted, and the mathematical response surface model of safety speed to curve radius was established. Finally, the critical speeds of the mathematical model calculation and the simulation test were compared under the same bend radius. Results show that the mathematical response surface model is a reasonable and accurate calculation method for calculating the safety speed of a vehicle that is turning on a curve. This model benefits the enhancement of vehicle active safety control technology.
唐歌腾, 任春晓, 李臣, 董轩. 基于TruckSim的不同弯道半径安全车速确定方法[J]. Journal of Highway and Transportation Research and Development, 2017, 11(1): 91-97.
TANG Ge-teng, REN Chun-xiao, LI Chen, DONG Xuan. Determination of Safety Speed of Different Radii based on TruckSim. Journal of Highway and Transportation Research and Development, 2017, 11(1): 91-97.
[1] Research Institute of Highway Ministry of Transport. The Blue Book of Road Safety in China 2014[M]. Beijing:China Communications Press, 2015.(in Chinese)
[2] CHEN Da-xing. Research on Relevant Target Selection Algorithm of Adaptive Cruise Control System[D]. Changchun:Jilin University, 2011. (in Chinese)
[3] YANG Tao, SONG Dan-dan. Simulation of Predictive Control for Vehicle Yaw Stability on Curve[J]. Journal of Highway and Transportation Research and Development, 2012, 29(10):149-153. (in Chinese)
[4] ZHANG De-zhao. Vehicular Adaptive Cruise Control on Curved Road[D]. Beijing:Tsinghua University, 2011. (in Chinese)
[5] ZHANG De-zhao, WANG Jian-qiang, LI Sheng-bo, et al. Risk Prediction Based Curve Anti-sideslip Speed Warning System[J]. Journal of Highway and Transportation Research and Development, 2009, 26(S1):44-48. (in Chinese)
[6] GUO Lie, ZHAO Yi-bing, LI Lin-hui, et al. Antisideslip and Antirollover Safety Speed Controller Design for Vehicle on Curved Road[J]. New York:Mathematical Problems in Engineering, 2014(1):1-12. (in Chinese)
[7] LEE Y H, DENG Wei-wen. Speed Control Method for Vehicle Approaching and Traveling on a Curve:United States, 7400963B2[P]. Jul.15, 2007. http://www.freepatentsonline.com/7400963.html.
[8] HUANG Yong, JIANG Gong-liang, SUN Zhen, et al. Research on Vehicle Speed Precaution System Set on Highway Curve Based on Image Processing Technology[J]. Journal of Shandong Jiaotong University, 2009, 17(4):23-27.
[9] WANG Chao-shen. Study on Road Traffic Safety Analysis and Countermeasures in Curve[D]. Xi'an:Chang'an University, 2010. (in Chinese)
[10] CHEN Liang. The Research on Vehicle Speed Precaution System Set on Highway Curve[D]. Xi'an:Chang'an University, 2012. (in Chinese)
[11] GUO Lie, HUANG Xiao-hui, GE Ping-shu, et al. Sideslip/rollover Avoidance Controller Design for Vehicle Driving on Curve Lane[J]. Journal of Dalian University of Technology, 2013, 53(4):579-585. (in Chinese)
[12] JIN Zhi-lin, WENG Jian-sheng, HU Hai-yan. Rollover Warning and Anti-rollover Control for Automobiles[J]. Journal of Dynamics and Control, 2007, 5(4):365-369. (in Chinese)
[13] LI Tao, HE Yong-jun, LIU Zhi-jian. Application Guide of Matlab Tool box[M]. Beijing:Publishing House of Electronics Industry, 2000:68. (in Chinese)
[1]
高大威, 郑腾飞. 基于微型客车碰撞的近似模型预测精度研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 94-103.
[2]
陈娟娟, 王生昌, 刘丹, 蔡凤田, 杨泽中. 乘用车转向性能主观评价与客观评价相关性[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 98-102.
[3]
张缓缓, 向绪爱, 叶克宝. 基于稳定性的四轮驱动电动汽车转矩分配策略研究[J]. Journal of Highway and Transportation Research and Development, 2017, 11(1): 98-102.
[4]
石振武, 解飞. 原状非饱和风积土结构性参数与强度指标关系的试验研究[J]. Journal of Highway and Transportation Research and Development, 2016, 10(2): 16-20.
[5]
刘剑, 王达. 基于响应面法的大跨径斜拉桥静力参数敏感性分析[J]. Journal of Highway and Transportation Research and Development, 2016, 10(1): 64-71.
2017, Vol. 11 
