摘要This study investigated the influence of material time-dependent performance on a PSC box girder bridge. We prepared 24 sets of standard prismatic concrete specimens in the construction site and synchronous maintenance in the deck for 3, 5, 7, 14, 28, and 60 days of concrete specimen mechanical test. The relationship among early-age concrete axial compressive strength, elastic modulus, and curing time was established, and then the function equation among them was optimized. The state of stress and deflection of the main beam in the maximum cantilever stage of the PSC box girder bridge considering time-dependent performance were analyzed by using the finite element software Midas civil, and the analysis results were compared with the calculation results of the standard value. Data show that the growth of the elastic modulus of early-age concrete lags behind the development of axial compressive strength. In consideration of the material's time-dependent performance, the maximum stress variation on top of the box girder is 2.22%, whereas the variation at the lower edge is 1.02% in the stages. Thus, the effect of material time variation on stress is small. The maximum displacement is 12.3 mm, whereas the current step displacement is 5.1 mm in the maximum cantilever stage. Thus, the displacement is deeply influenced by the material time-dependent performance.
Abstract：This study investigated the influence of material time-dependent performance on a PSC box girder bridge. We prepared 24 sets of standard prismatic concrete specimens in the construction site and synchronous maintenance in the deck for 3, 5, 7, 14, 28, and 60 days of concrete specimen mechanical test. The relationship among early-age concrete axial compressive strength, elastic modulus, and curing time was established, and then the function equation among them was optimized. The state of stress and deflection of the main beam in the maximum cantilever stage of the PSC box girder bridge considering time-dependent performance were analyzed by using the finite element software Midas civil, and the analysis results were compared with the calculation results of the standard value. Data show that the growth of the elastic modulus of early-age concrete lags behind the development of axial compressive strength. In consideration of the material's time-dependent performance, the maximum stress variation on top of the box girder is 2.22%, whereas the variation at the lower edge is 1.02% in the stages. Thus, the effect of material time variation on stress is small. The maximum displacement is 12.3 mm, whereas the current step displacement is 5.1 mm in the maximum cantilever stage. Thus, the displacement is deeply influenced by the material time-dependent performance.
基金资助:Supported by the National Natural Science Foundation of China (No. 51678072)
通讯作者:
WEN Cheng
E-mail: 381150081@qq.com
引用本文:
文成, 张红显. 悬臂施工材料时变效应对PC箱梁桥的影响研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 38-44.
WEN Cheng, ZHANG Hong-xian. Influence of Material Time-dependent Performance on the Cantilever Construction of PSC Box Girder Bridge. Journal of Highway and Transportation Research and Development, 2019, 13(2): 38-44.
[1] LIU Yang. The Research on Time-dependent Reliability of Concrete Cable-stayed Bridges during Construction[D]. Changsha:Hunan University, 2005. (in Chinese)
[2] JIN Xian-yu, TIAN Ye, JIN Nan-guo. Early age properties and cracking control of concrete[J]. Journal of Building Structures, 2010(31), 204-212. (in Chinese)
[3] LÜ Yi-gang, HAN Wei-wei, LÜ Jian-ming, et al. Experimental Study on Long-term Elastic Modulus of Bridge Concrete Based on Exposure Experiment[J]. Journal of Highway and Transportation Research and Development, 2016(33), 78-84. (in Chinese)
[4] GUO Tong, CHEN Zhe-heng, LIU Tie, et al. Time-dependent Reliability of Strengthened PSC Box-girder Bridge Using Phased and Incremental Static Analyses[J]. Engineering Structures, 2016,117:358-371.
[5] CHEN Meng. The Mechanical Analysis and Control on Shrinkage Cracking for Concrete Structure[D]. Wuhan:Wuhan University of Technology, 2006. (in Chinese)
[6] HU Xiao-peng. Time-varying Law of Early Age Concrete Structure Properties[D]. Xi'an:Xi'an University of Architecture & Technology, 2011. (in Chinese)
[7] GB175-2007, Common Portland Cement[S]. (in Chinese)
[8] JING Xianyu, SHEN Yi, LI Zongjin, et al. Influence of preload concrete on its latter performance[J]. Concrete, 2003(7), 35-37.
[9] JTG E30-2005, Test Methods of Cement and Concrete for Highway Engineering[S]. (in Chinese)
[10] LIU Yuan. Error Theory and Data Processing[D], Dalian:Dalian University of Technology, 2008.
[11] XIONG Yan-yan, WU Xian-qiu. The Generalizing Application of Four Judging Criterions for Gross Errors[J]. Physical Experiment of College, 2010,23(1), 66-68. (in Chinese)
[12] LIN Li-fen, XIAO Hua, WU Xian-qiu. Comparison between Chauvenet`s Criterion and Grubbs Criterion[J]. Physical Experiment of College, 2012,25(6), 86-88. (in Chinese)
[13] TIAN Ming-ge. The Research on the Performance of Reinforced Concrete Frame Structure during Construction[D]. Changsha:Hunan University, 2008. (in Chinese)
[14] GB50010-2010, Code for Design of Concrete Structures[S]. (in Chinese)
[15] ZHOU Mi, SONG Yi-fan, ZHAO Xiao-xing. Control Technique for Construction of Prestressed Concrete Cantilever Casting Bridge[J]. Journal of Chang`an University:Natural Science Edition, 2005,25(6), 43-48. (in Chinese)
[16] DING Xin-hai. Large Span Continuous Rigid Frame Bridge Girder Construction Simulation Analysis and Reliability Research[D]. Changsha:Changsha University of Science & Technology, 2012. (in Chinese)
[17] ZHANG Fang. Research on Time-Dependent Performance and Analytical method for Long-span Prestressed Concrete Girder Bridge[D]. Chengdu:Southwest Jiaotong University, 2011. (in Chinese)
[18] JTG D62-2004, Code for Design of Highway Reinforced Concrete and Prestressed Concrete Bridges and Culverts[S]. (in Chinese)
[1]
傅宇方, 张劲泉, 牛荻涛. 考虑环境作用和疲劳荷载作用下的钢筋混凝土梁抗弯强度计算方法研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(3): 44-51.
[2]
楚玺, 周志祥, 邓国军, 段鑫, 姜欣. 基于欧拉运动放大算法的桥梁振动分析方法研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(3): 52-61.
[3]
常柱刚, 王林凯, 夏飞龙. 基于CV NewMark-b法桥梁风致振动FSI数值模拟[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 28-37.
2019, Vol. 13 
