摘要Overload and oversize transport not only causes serious damage to highway, but also brings about irreparable traffic accidents. WIM technology can control the overload and oversize of vehicles and provide a reliable basis for the heavy truck toll collection. The main existing WIM equipment includes bending-plate (weighing part wheel load), single-scale-platform (weighing load of single-axle), double-scale-platform (weighing load of single-axle), axis-group-scale (weighing weight of axis-group), and vehicle-scale (weighing total weight of vehicle). They have many advantages and disadvantages in cost, installation, maintenance, traffic efficiency and accuracy of WIM. The WIM accuracy is one of the key indicators considered in application of technology governance, toll by weight, and traffic investigation. The carrier length of WIM system increases gradually with the increase of WIM accuracy, which leads to the construction cost and time increase also. In order to ensure the WIM accuracy, considering the economy of the carrier length, based on the vibration characteristics of the vehicle and the scale, the mathematical model of the WIM signal is established by means of moving average filtering and B spline least square method, and the vibration disturbance of low frequency dynamic load is effectively eliminated. The test result shows that (1) the weight error is less than 0.5% if test vehicles pass through the 0.8 m and 1.6 m long scales in the speed range of 0-5 km/h and 0-12 km/h, which meets the national standard about Class 1 scale; (2) if test vehicles pass through the 2.6 m and 3 m long scales with the theoretical limit speed of 20.7 km/h and 24.3 km/h, the statistical weight error is less than 0.5%. The research not only provided a theoretical basis for design the length of the scale, but also has important reference value for improvement of the WIM accuracy of the existing installed single scale and double scales.
Abstract:Overload and oversize transport not only causes serious damage to highway, but also brings about irreparable traffic accidents. WIM technology can control the overload and oversize of vehicles and provide a reliable basis for the heavy truck toll collection. The main existing WIM equipment includes bending-plate (weighing part wheel load), single-scale-platform (weighing load of single-axle), double-scale-platform (weighing load of single-axle), axis-group-scale (weighing weight of axis-group), and vehicle-scale (weighing total weight of vehicle). They have many advantages and disadvantages in cost, installation, maintenance, traffic efficiency and accuracy of WIM. The WIM accuracy is one of the key indicators considered in application of technology governance, toll by weight, and traffic investigation. The carrier length of WIM system increases gradually with the increase of WIM accuracy, which leads to the construction cost and time increase also. In order to ensure the WIM accuracy, considering the economy of the carrier length, based on the vibration characteristics of the vehicle and the scale, the mathematical model of the WIM signal is established by means of moving average filtering and B spline least square method, and the vibration disturbance of low frequency dynamic load is effectively eliminated. The test result shows that (1) the weight error is less than 0.5% if test vehicles pass through the 0.8 m and 1.6 m long scales in the speed range of 0-5 km/h and 0-12 km/h, which meets the national standard about Class 1 scale; (2) if test vehicles pass through the 2.6 m and 3 m long scales with the theoretical limit speed of 20.7 km/h and 24.3 km/h, the statistical weight error is less than 0.5%. The research not only provided a theoretical basis for design the length of the scale, but also has important reference value for improvement of the WIM accuracy of the existing installed single scale and double scales.
基金资助:Supported by Special Project of Science and Technology Innovation for Social and Livelihood in Chongqing(No.cstc2016shmszx30018); Special Project of Science and Technology Innovation for Social Undertakings and People's Livelihood Guarantee in Chongqing(No.cstc2015shms-ztzx30016)
通讯作者:
DU Chang-dong
E-mail: duchangdong@cmhk.com
引用本文:
杜长东. 低频动态载荷理论分析及称重精度提高算法研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(3): 105-110.
DU Chang-dong. Theoretical Analysis of Low Frequency Dynamic Load and an Research on the Algorithm for Weighing Accuracy Improvement. Journal of Highway and Transportation Research and Development, 2018, 12(3): 105-110.
[1] LI Xiao-song. Application of Weighing in Moving Technique[J]. Journal of Highway and Transportation Research and Development, 1991, 8(3):65-67.(in Chinese)
[2] ZHANG Jian-yong, ZHOU Shang-ru, YANG Jun. Design of Truck Weighing Toll System Based on ETC Mode[J]. China Measurement & Test, 2016,42(7):84-87.(in Chinese)
[3] CHENG Bao-xi. Analysis on the Freight Vehicle Toll by Weight Based on ETC Mode[J]. Modern Industrial Economy and Informationization, 2013(4):59-61.(in Chinese)
[4] JIA Hai-qing, XIN Xing, GAO Xue-chi, et al. Data Collection and Analysis by Using Weigh-in-motion[J]. Journal of Highway and Transportation Research and Development, 2010,27(6):138-142.(in Chinese)
[5] ZHANG Rui, LÜ Wen-hong, ZHANG Rui-xi. Research of Vehicle Weigh-in-motion System Based on Neural Network Self-adaptive Filtering[J]. Journal of Highway and Transportation Research and Development, 2010, 27(7):138-141.(in Chinese)
[6] HAN L D, KO S S, GU Z,et al. Adaptive Weigh-in-motion Algorithms for Truck Weight Enforcement[J].Transportation Research Part C:Emerging Technologies, 2012,24(9):256-269.
[7] CHEN Chao-bo, SHEN Chen, GAO Song. Study of Highway Overload Vehicle Dynamic Triage System[J]. Foreign Electronic Measurement Technology, 2014,33(12):49-52.(in Chinese)
[8] ZHAI Li-xia. Study on Dynamic Characteristics Analysis and Data Processing of Dynamic Vehicle Weighing System[D]. Tianjin:Tianjin University of Technology, 2012.(in Chinese)
[9] HUANG Dan, TANG Lian, ZHANG Hong-ming, et al. Multi-resolution Analysis and De-noising Bending Plate WIM Signal[J]. Automation and Instrumentation, 2014(5):181-183.(in Chinese)
[10] MAO Jian-dong. Model Establishment and Parameter Identification for Dynamic Weighing System[J]. Transducer and Microsystem Technologies, 2006,25(6):72-74.(in Chinese)
[11] HU Chun-hai, CHEN Jing. Model Parameter Estimation Method for Dynamic Weighing[J]. Automation and Instrumentation, 2005,20(4):23-25.(in Chinese)
[12] ZHANG Yu, HE Shu-xin,WEN Shao-bo, et al. The Two Measurements of Signal Processing for Weigh-in Motion of Vehicle[J]. Journal of Nanjing Institute of Technology:Natural Science Edition, 2004,2(4):17-21.(in Chinese)
[13] WANG Xiao-peng, LIU Wen-bin, HUANG Jun-jie, et al. Simulation Analysis of Vehicle Vibration under Randomly Road Excitation[J]. Journal of Shandong Jiaotong University, 2010,18(3):7-11.(in Chinese)
[14] SUN Lu. Theoretical Study on Ground Dynamic Responses of Moving Vehicles under Random Loads and Excitations[M\]. Nanjing:Southeast University, 1996.(in Chinese)
[15] MA Ying-lin. Research and Implementation of Vehicle Overloading Dynamic Monitoring System[D]. Beijing:Beijing Jiaotong University, 2010.(in Chinese)
[16] SINHA N K, KUSZTA B. Modeling and Identification of Dynamic Systems[M]. Princeton:Van Nostrand Company Inc, 1983.(in Chinese)
[17] ZHAO Yi. Arithmetic Mean Method and Weighting Mean Method of Digital Filter[J]. Instrument Technology, 2001(4):41.(in Chinese)
[18] LI Bei-lei. Multiple Adaptive Least Squares Curve Fitting Method and Its Application[D]. Jingzhou:Yangtze University, 2014. (in Chinese)
[1]
张玲, 郝京京, 戢晓峰. 城际货物运输联系的网络特性及空间组织优化研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 68-78.
[2]
梁仁鸿, 仵思燃. 公路货物运输量统计新试行方案问题分析及完善思路研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 103-110.
[3]
郝京京, 戢晓峰, 徐停停. 信息关注度与公交服务水平的耦合协调性测度[J]. Journal of Highway and Transportation Research and Development, 2017, 11(4): 104-110.
[4]
陈娇娜, 张翔, 张生瑞, 靳引利. 高速公路行程时间可靠性模型参数估计方法比较分析[J]. Journal of Highway and Transportation Research and Development, 2017, 11(3): 93-99.
[5]
王文娣, 杨忠振, 李一旋. 基于旅客价值测度模型的客运市场细分及公路客运发展策略研究[J]. Journal of Highway and Transportation Research and Development, 2017, 11(1): 103-110.
[6]
王淑云, 路荣斌, 郝秀菊. 关于提高我国危险品运输品质的思考[J]. Journal of Highway and Transportation Research and Development, 2016, 10(3): 105-110.
[7]
覃运梅, 毛海军, 黑秀玲. 基于自动快递机的快递配送车辆路径优化研究[J]. Journal of Highway and Transportation Research and Development, 2016, 10(3): 97-104.
[8]
和豪涛, 李扬, 张正华. 基于AHP-灰色关联度的公路大件运输方案优选[J]. Journal of Highway and Transportation Research and Development, 2016, 10(2): 98-102.
[9]
王海洋. 我国公路政策可持续发展战略研究分析[J]. Journal of Highway and Transportation Research and Development, 2016, 10(2): 103-110.
[10]
戢晓峰, 普永明, 梁斐雯, 覃文文. 交通管制时限条件下城市物流配送优化双层规划模型[J]. Journal of Highway and Transportation Research and Development, 2015, 9(3): 94-101.
[11]
王淑云, 孙虹. 需求变动下的冷链品配送路径规划[J]. Journal of Highway and Transportation Research and Development, 2015, 9(2): 103-110.
[12]
李淑琴, 杨斌, 胡志华, 明惠, 周珍. 具有连续工班数量折扣的集卡车队外包决策问题[J]. Journal of Highway and Transportation Research and Development, 2014, 8(3): 96-103.
[13]
胡青蜜, 胡志华. 二级轴辐式零担物流网络设计的资源均衡利用问题[J]. Journal of Highway and Transportation Research and Development, 2014, 8(1): 101-110.