道路势能开发利用技术综述

Abstract
Figure/Table
References (0)
Related Citation (15)

Abstract The related research and application status of potential energy technologies for road at home and abroad were comprehensively investigated and systematically analyzed in this study to provide theoretical guidance and technical support for the development and utilization of road potential energy sources. The applicability of different types of power generation technologies, such as photovoltaic power generation, piezoelectric power generation pavement, and road speed reducer power generation equipment, was analyzed, and the development direction for future research of road energy was proposed in this paper.

Key words： road engineering photovoltaic power generation road potential energy piezoelectric power generation power generation equipment

Received: 28 March 2019

Fund:Supported by the Fundamental Research Funds for the Central research institutes (No. 2018-9013;).

Corresponding Authors: ZHONG Ke E-mail: k.zhong@rioh.cn

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHONG Ke
	SUN Ming-zhi
	SUN Sheng-kai

Cite this article:

ZHONG Ke,SUN Ming-zhi,SUN Sheng-kai. Summary of the Development and Utilization Technology for Road Potential Energy[J]. Journal of Highway and Transportation Research and Development, 2019, 13(3): 1-7.

URL:

http://manu27.magtech.com.cn/Jwk_gljtkj_en/EN/ OR http://manu27.magtech.com.cn/Jwk_gljtkj_en/EN/Y2019/V13/I3/1

[1] ZHAO X K. Feasibility Study of Piezoelectric Power Generation Technology in Road Application[D]. Xi'an:Chang'an University, 2013. (in Chinese)
[2] LI Y W, CHEN S, WANG C H. Current Situation and Development of Intelligent Power Generation Pavement Technology[J]. Materials guide A:Review, 2015, 29(4):34-37. (in Chinese)
[3] THAD S. Hunman Powered Wearable Computing[J]. IBM System Journal, 1996, 35(7):318-320.
[4] SHASHANK P. Advances in Energy Harvesting Using Low Profile Piezoelectric Transducers[J]. Journal of Electroceram, 2007(19):165-167.
[5] UNGER N, SHINDELL D T, WANG J S. Climate Forcing by the On-road Transportation and Power Generation Sectors[J]. Atmospheric Environment, 2009, 43(19):3077-3085.
[6] ORR R J, ABOWD G D. The Smart Floor:A Mechanism for Natural User Identification and Track[C]. Conference on Human Factors in Computing Systems. New York:ACM, 2000, 275-276.
[7] GONZALEZ-SALAZAR M A, VENTURINI M, POGANIETZ W R, et al. Development of a Technology Roadmap for Bioenergy Exploitation Including Biofuels, Waste-to-energy and Power Generation & CHP[J]. Applied Energy, 2016, 180:338-352.
[8] SHANG G Q, TAO Y Y, LI Z R. On Piezoelectric Harvesting Technology[J]. Advanced Materials Research, 2012, 516-517.
[9] LIU K, LU Z, YU G. Power Control Method and Device for Physical Random Access Channel[J]. Electroceram. 2012, 27(6):141-145.
[10] WANG X G, CHEN F B, ZHANG W Q. Luminescence Characteristics and Microstructure of Cement-based Luminescent Materials[J]. Journal of Nanchang University:Science Edition, 2013, 37(3):277-280. (in Chinese)
[11] CHA X D, ZHANG R J, ZHANG Q S. Mechanics Analysis and Model Preparation of Hollow Plate Elements for Solar Pavement [J]. Journal of Solar Energy, 2016, 37(1):136-141. (in Chinese)
[12] YE X N, WANG X G. Preparation and Mechanical Properties of Resin Light-conductive Concrete[D]. Nanchang:Nanchang University, 2014. (in Chinese)
[13] FANG Y K, PAN Z M, YANG T. Cymbal composite Piezoelectric Actuator Micro-feed Technology Research[J]. Application of Single Chip Microcomputer and Embedded System, 2005(12):54-57. (in Chinese)
[14] ZHAO H D, YU J M, LING J M. Finite Element Analysis of Piezoelectric Cymbal Sensor for Asphalt Pavement Collection[J]. Journal of Japan Ceramic Society, 2011,1382(18):909-915.
[15] FANG K, LI X X, YANG Z G. Research Status of Piezoelectric Energy Acquisition Devices[J]. Sensors and Microsystems, 2006, 25(10):7-10. (in Chinese)
[16] WU S P, CHEN M Y, HAN J. Progress in Solar Energy Collection Technology for Asphalt Pavement:Progress[J]. Highway Transportation Science and Technology, 2010, 27(3):17-22. (in Chinese)
[17] WANG Z H. A Piezoelectric Cable Power Generation Pavement Device:China, ZL 201320685599.8[P]. 2013-10-31. (in Chinese)
[18] WANG Z H. A Kind of Asphalt Concrete Power Generation Pavement Structure:China, 201320050899.5[P]. 2013-18-09. (in Chinese)
[19] FANG G H, LIU J F, WANG X C. Design and Preliminary Study of a New Type of Pavement Power Generation Device[J]. Hydraulic and Pneumatic, 2011, 11(3):14-15. (in Chinese)
[20] MEI X, WANG X Y. Design and Analysis of a New Type of Pavement Power Generation Device[J]. Mechanical Design and Research. 2012, 28(6):56-59.
[21] ZENG X T. Inertial Power Generation System for Driving Downhill on Expressway:China, 201210004239.8[P]. 2011-01-08. (in Chinese)
[22] KONG F G, WU G L. Theoretical Research on Electromagnetic Road Deceleration Belt Power Generation Device[J]. Mechanical Design and Manufacturing, 2014(4):76-78. (in Chinese)
[23] TANG Z, CHEN W. An Energy Recovery Device Using Deceleration Belt:China, 103470459A[P]. 2013-03-27. (in Chinese)
[24] ZHANG H, SONG X R, FENG J. Road Power Generation System Based on Piezoelectric Effect[J]. Applied Mechanics & Materials, 2013, 329:229-233.(in Chinese)
[25] ZHANG B L, ZHANG S Y. Design and Implementation of Pavement Power Generation System Based on Piezoelectric Ceramics[D]. Xi'an:Chang'an University, 2017. (in Chinese)
[26] JIANG K, CAI X J. Power Generation Device of Road Deceleration Belt:China, 101285455B. 2011-06-29. (in Chinese)
[27] CHEN S B, QIN Y Q. A Kind of Reducer Power Generation Device Based on Hydraulic System:China, 206268023U. 2017-06-20. (in Chinese)