1. School of Mechatronic Engineering, Lingnan Normal Universtity, Zhanjiang Guangdong 524048, China;
2. College of Mechanical and Electrical Engineering, Qiqihar University, Qiqihar Heilongjiang 161006, China
Simulation and Optimization of Fan System for Road Sweeper
ZHANG Hong-jun1,2, WANG Xue-fei2, LIU Ke-ke2
1. School of Mechatronic Engineering, Lingnan Normal Universtity, Zhanjiang Guangdong 524048, China;
2. College of Mechanical and Electrical Engineering, Qiqihar University, Qiqihar Heilongjiang 161006, China
摘要A QC/T51-2006 standard country five-series road-sweeping vehicle is used as research object to improve the mechanization and work efficiency of a road sweeper and reduce the degree of environmental pollution. This study examines the flow of the fluid in an air duct of the sweeper during the working process and identifies the limitations of the original fan structure design. The sweeping air duct and structure are of optimized design. In accordance with considerable analyses and research, fluid simulation of the original air duct was conducted using the finite element analysis software NX Nastran. A turbulence model is used to simulate the gas field inside the duct, ignoring the influence of temperature on the gas and wind pressure loss caused by a high-speed rotation of the fan. The entire duct was divided into two parts, namely, entrance and exhausted air ducts. In the model transfer process, the original assembly hole and welding plate were removed, and the unnecessary fillet and protruding structure were optimized. This approach was conducted to obtain the accurate value of wind speed in the suction port and outlet, which was compared with the starting velocity of dust particles and suspension speed. The flow field and streamline, velocity vector, and static pressure distribution of the original sweeper were obtained. Results show that through the data simulation analysis, the original sweater fan duct structure was optimized and its design was enhanced. This result increases the air duct speed by 50%. The fan power is reduced by 20 kW, thereby enhancing its efficiency. The energy saving is approximately 36.6%. The results provide data support and theoretical basis for the optimal design of the duct and structure. Furthermore, the results present theoretical and methodological support for the development of a new road sweeper.
Abstract:A QC/T51-2006 standard country five-series road-sweeping vehicle is used as research object to improve the mechanization and work efficiency of a road sweeper and reduce the degree of environmental pollution. This study examines the flow of the fluid in an air duct of the sweeper during the working process and identifies the limitations of the original fan structure design. The sweeping air duct and structure are of optimized design. In accordance with considerable analyses and research, fluid simulation of the original air duct was conducted using the finite element analysis software NX Nastran. A turbulence model is used to simulate the gas field inside the duct, ignoring the influence of temperature on the gas and wind pressure loss caused by a high-speed rotation of the fan. The entire duct was divided into two parts, namely, entrance and exhausted air ducts. In the model transfer process, the original assembly hole and welding plate were removed, and the unnecessary fillet and protruding structure were optimized. This approach was conducted to obtain the accurate value of wind speed in the suction port and outlet, which was compared with the starting velocity of dust particles and suspension speed. The flow field and streamline, velocity vector, and static pressure distribution of the original sweeper were obtained. Results show that through the data simulation analysis, the original sweater fan duct structure was optimized and its design was enhanced. This result increases the air duct speed by 50%. The fan power is reduced by 20 kW, thereby enhancing its efficiency. The energy saving is approximately 36.6%. The results provide data support and theoretical basis for the optimal design of the duct and structure. Furthermore, the results present theoretical and methodological support for the development of a new road sweeper.
基金资助:Supported by the Heilongjiang Provincial Department of Transportation Science and Technology Project (No. 2012013), Qiqihar Science and Technology Project (No.GYGG-201303), Heilongjiang Provincial Department of Education Basic Research Business (Qiqihar University Youth Academic Backbone Project (No.135109307), Qiqihar University Education Science Research Project (No.2016073)
通讯作者:
ZHANG Hong-jun
E-mail: zhj118@yeah.net
引用本文:
张洪军, 王雪飞, 刘可可. 高速公路清扫车风机系统仿真及优化研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 92-97.
ZHANG Hong-jun, WANG Xue-fei, LIU Ke-ke. Simulation and Optimization of Fan System for Road Sweeper. Journal of Highway and Transportation Research and Development, 2018, 12(4): 92-97.
[1] DONG Bin, REN Cui-ping, WU Qun-qi. Research on the Relationship between Highway Transportation and Dynamic Development of National Economy Based on Efficiency[J]. Journal of Highway and Transportation Research and Development,2017,34(10):153-157.(in Chinese)
[2] HUANG Xing-hua, SUN Hui. Research Progress on Key Components of Road Sweeping Vehicle[J]. Journal of Shanghai Dian Ji University, 2016,19(1):1-6. (in Chinese)
[3] FAN Jin-xi, CHEN Dian-ling. Technical Analysis of Domestic Road Cleaning Vehicle[J].Machinery manufacturing, 2013, 51(8):46-49. (in Chinese)
[4] HAYDEN K S, PARK K,CURTI S. Effect of Particle Characteristics on Particle Pickup Velocity[J]. Power Technology, 2003, 131(1):7-14.
[5] KALMAN H, SATRAN A. Pickup(Critical) Speed of Particles[J]. Power Technology, 2005, 160(2):103-113.
[6] LUO Li-yan, CHEN Jing-jie, LI Yuan,et al. Discussion on Driving Type of the Sweeper[J]. Construction Machinery Technology and Management, 2010,(8):105-107.(in Chinese)
[7] CHEN Hong-yue, MAO Jun, ZHANG Yu. Visualizing Simulation of Flow Field in the Large Displacement Gear Pump Based on Two-module Gears[J]. Chinese Journal of Engineering Design, 2012(3):192-195.(in Chinese)
[8] WU Xin-fang, HE Zi-yi. Overall Design Analysis of Large Multi-functional Road Sweepe[J]. Special Purpose Vehicle, 2014(6):87-89.(in Chinese).
[9] ZHONG Yin. Urban Scavengers:Road Sweeping Car Equipped with Allison Transmission Ensures Marbella Streets Clean[J]. Transpo World, 2013,(10):96.(in Chinese)
[10] LI Jun, WANG Xian-lin. Reliability and Availability Analysis of Pumping System Using Modeling Based on Decomposition Approach[J]. Chinese Journal of Engineering Design, 2015(1):18-25.(in Chinese)
[11] WANG Wei-zhen. Elimination of Failure of Hydraulic System of Road Cleaning Vehicle[J]. Modern Economic Information, 2009,(8):207.(in Chinese)
[12] CHEN Shu-xun. Load Expression and Structural Optimization of Compressed Rubbish Vehicle[J].Chinese Journal of Mechanical Engineering, 2008,44(3):213-219.(in Chinese)
[13] MAO Rui-cheng, LIN Kang, CHEN Hua. Concept Design, Investigation and Practice of Road Sweeper[J]. Industrial Design, 2016,(1):82-84. (in Chinese)
[14] BIAN Shi-chuan,WANG Kao-ying,LÜ Jian-ying. Analysis on Economical Operation Technology of Optimizing Application Condition of Fan and System[J].Environmental Protection and Circular Economy,2012,(5):54-57. (in Chinese)
[15] ZHANG Chen-guang. Research on Matching Performance of Swept Truck Working Device[D]. Xi'an:Chang'an University, 2010. (in Chinese)
[16] QIN Chao. The Road Sweeper Profiles and Design of Removal and Transportation Devices[J]. Automobile Parts,2015,(5):56-66. (in Chinese)
[17] ZHANG Wei. Research on Control of Cleaning Mechanism of Sweeper[D].Chongqing:Chongqing University,2001. (in Chinese)
[18] SU Yi-feng,YAN Shi-rong. Research of the Effects of Sweeper's Working Parameters to the Working Efficiency[J]. Journal of Mechanical & Electrical Engineering, 2016, 33(2):160-164. (in Chinese)
[19] YU Zhi-wei, XU Xiao-lei, GUO Jiangui, et al. Fracture analysis of impeller blade of a locomotive draught-fan[J].Engineering-FailureAnalysis.2013,(27):16-29.
[20] ANDERSON R S,HAFF P K. Wind Modification and Bed Response during Saltation of Sand in Air. Acta Mechanica. 1991, supp1.1:21-51.
[21] LI Yang, CHU Chun-chao, CHEN Jian-ying. Study on Evaluation Index System and Application of Energy Saving and Emission Reduction in Highway Traffic[J]. Journal of Highway and Transportation Research and Development, 2013,30(1):141-145. (in Chinese)
[1]
胡亚辉, 董皓, 张君安. 整体式梯形转向机构最优区域值计算及优化[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 103-110.
[2]
唐自强, 龚贤武, 潘勇, 唐超, 王玮琳. 基于行驶状态估计的车车协同纵向安全距离模型[J]. Journal of Highway and Transportation Research and Development, 2017, 11(2): 103-110.
[3]
李文亮, 周炜, 张禄, 曹琛. 考虑路面不平度和速度分布的用户目标载荷构建方法[J]. Journal of Highway and Transportation Research and Development, 2017, 11(2): 52-55.
[4]
张禄, 王云鹏, 任春晓, 刘婷洁. 机械零部件时变可靠性及其灵敏度分析[J]. Journal of Highway and Transportation Research and Development, 2016, 10(1): 104-110.
[5]
王书举, 潘一山, 张国胜, 崔海涛. 基于ECE R66法规的客车侧翻碰撞安全性分析[J]. Journal of Highway and Transportation Research and Development, 2015, 9(4): 97-101.
[6]
高晋, 牛子孺, 杨秀建, 张昆. 悬架控制臂液压衬套与整车平顺性关联分析[J]. Journal of Highway and Transportation Research and Development, 2015, 9(4): 102-110.
[7]
贾爱琴, 崔建锋, 陈建军, 高卫. 基于可靠灰色粒子群算法的汽车悬架参数的多目标优化设计[J]. Journal of Highway and Transportation Research and Development, 2015, 9(3): 102-110.
[8]
胡东海, 何仁. 基于电液复合制动系统的电动汽车再生制动控制策略研究[J]. Journal of Highway and Transportation Research and Development, 2015, 9(1): 105-110.