|
|
|
| Determination Method for Damaged Concrete Strength |
| HE Hai-fang1,2, ZHANG Jin-quan1, CHENG Shou-shan1 |
1. Research Institute of Highway, Ministry of Transport, Beijing 100088, China;
2. Department of Civil Engineering, Tsinghua University, Beijing 100084, China |
|
|
|
|
Abstract This study aims to reflect the original strength of concrete material objectively and accurately by determining the concrete damage degree quantitatively and identifying the relation between damage variable and strength. According to uniaxial compressive stress-strain curve and the strain equivalent principle, the stress-strain curve of damaged concrete is obtained while the concrete subjected to circulate loading has different degrees of damage and strain is beyond that corresponding to peak stress. The relation between the damage variable and concrete strain at different strength grades is derived. The corresponding strain is obtained by testing the damage variable of damaged concrete. The original strength of the concrete material is calculated according to the testing strength of core samples of damaged concrete with a height and diameter of 100 and 150 mm, respectively. Finally, the conclusion is verified by a test.
|
|
Received: 10 December 2012
|
| Fund:Supported by the Road and Transport R&D Project for Western Regions of China Commissioned by Ministry of Transport (No.200831822343) |
|
Corresponding Authors:
HE Hai-fang, hf.he@rioh.cn
E-mail: hf.he@rioh.cn
|
|
|
|
[1] HAN Jian-ping, WANG Fei-xing, WANG Zhi-hua. Discussion on Several Issues of Testing and Evaluating Concrete Strength by Drilling Core Method[M]. Earthquake Resistant Engineering and Retrofitting, 2008,30(2):109-117.(in Chinese)
[2] YANG Zhao-min, LI Nai-ping. Application of Small Diameter Core Sample to the Compressive Strength Identification of Concrete Structure[J]. Journal of Xi'an University of Architecture & Technology:Natural Science Edition,2002,34(4):407-409.(in Chinese)
[3] HE Ming, FU Xiao-ling, XU Dao-yuan. On Concrete Damage Models[J]. Journal of Fuzhou University:Natural Science Edition,1994, 22(4):109-114.(in Chinese)
[4] YANG Guang-song. Damage Mechanics and Composite Damage[M]. Beijing:National Defense Industry Press,1995. (in Chinese)
[5] XU Ji-shan. Strength Theory and Its Application[M].Beijing:China Water Power Press, 1984. (in Chinese)
[6] YU Hai-yang, WU Jian-hua, LI Qiang. A Review of Concrete Damage Constitutive Models[J]. Journal of Chongqing Jianzhu University, 2007, 29(2):68-72.(in Chinese)
[7] YU Tian-qing. Damage Theory and Its Application for Concrete Structure[J]. Bridge Construction, 1986(2/3):45-58. (in Chinese)
[8] QIAN Ji-cheng, ZHOU Jian-fang. Two Concrete Damage Models and Their Application[J]. Journal of Hohai University, 1989, 17(3):40-43. (in Chinese)
[9] LOLAND K E. Continuous Damage Model for Load-response Estimation of Concrete[J]. Cement and Concrete Research, 1980(10):395-402.
[10] ZHANG Kui, GAO Yong-sheng,ZHANG Shao-ming. Damage Variable Proposed on Characterizing Micro-crack Damage[J]. Mechanics and Practice, 1995, 17(6):33-35. (in Chinese)
[11] GB50010-2002, Code for Design Concrete Structures[S].(in Chinese)
[12] GUO Zhen-hai, ZHANG Xiu-qin. Experimental Study on Stress-strain Full Curves of Concrete under Cyclic Loading[C]//Research Reports III by Institute of Anti-earthquake and Blasting-resistance Engineering, Tsinghua University. Beijing:Tsinghua University Press, 1981.(in Chinese)
[13] CECS 03:88, Technical Specification for Testing Concrete Strength with Drilled Core[S]. (in Chinese)
[14] ZHANG Yi-fei, KANG Jian-hua, WANG Zhong, et al. Determination of Concrete Strength Based on Small Sampling Data with Information Diffusion Theory[J]. Journal of Highway and Transportation Research and Development, 2007, 24(5):39-42. (in Chinese) |
| [1] |
CHANG Zhu-gang, WANG Lin-kai, XIA Fei-long. Fluid-structure Interaction Numerical Simulation of Bridge Wind-induced Vibration Based on CV Newmark-β Method[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 28-37. |
| [2] |
XU Bai-shun, YAO Chao-yi, YAO Ya-dong, QIAN Yong-jiu, MA Ming. Carbon Fiber Reinforced Polymer-to-steel Interfacial Stress Parameter Sensitivity Based on Viscoelastic Constitutive[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 20-27. |
| [3] |
WEN Cheng, ZHANG Hong-xian. Influence of Material Time-dependent Performance on the Cantilever Construction of PSC Box Girder Bridge[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 38-44. |
| [4] |
LU Guan-ya, WANG Ke-hai, ZHANG Pan-pan. Seismic Design and Evaluation Methods for Small-to-Medium-Span Highway Girder Bridges Based on Machine Learning and Earthquake Damage Experience[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 24-37. |
| [5] |
YANG Yi-ming, PENG Jian-xin, ZHANG Jian-ren. Random Field Parameter Estimation of Service Bridge Component and Comparative Analysis of Estimation Methods[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 38-49. |
| [6] |
ZHAN Jian, SHAO Xu-dong, QU Wan-tong, CAO Jun-hui. Multi-parameter Fatigue Analysis of a Steel-super Toughness Concrete Lightweight Composite Bridge Deck[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 50-59. |
|
|
|
|
2013, Vol. 7 
