|
|
|
| Analysis of Structural Types and Mechanical Performance of Steel-concrete Connections without Cells |
| ZHANG Kai1, LIU Yong-jian1, JU Ming-jie2, LIU Jiang1 |
1. School of Highway, Chang'an University, Xi'an Shaanxi 710064, China;
2. Dongguan Communications Investment Group Co., Ltd., Dongguan Guangdong 523010, China |
|
|
|
|
Abstract Steel-concrete connections, as key components of hybrid bridges, present a complex structural type and mechanical behavior. On the basis of the steel-concrete connections in the Lichuan Bridge, a numerical analysis was performed in this work to comprehensively investigate the mechanical performances of each structural component and compare the characteristics of different connector types between two different schemes. Results show that the perfobond strip and stud connectors in the steel-concrete connections of the Lichuan Bridge exhibit a non-uniform mechanical behavior in the direction of the bridge midline. The connectors in the end areas near the bearing plate demonstrate a large inner force. Normal stress on the top flange is neither transversely nor uniformly distributed in the steel-concrete connections under hogging moment, but the arrangement of tendons affects the distribution of normal stress on the top flange. The mutation part of the stiffening ribs in a steel beam shows increased stress concentration. However, the two connector types only slightly influence the stress of concrete and steel flange.
|
|
Received: 25 March 2016
|
| Fund:Supported by the National Natural Science Foundation of China (No.51178051); the Road and Transport R&D Project for Western Regions of China Commissioned by Ministry of Transport (No.2013318812410); and the Scientific Research Project of Dongjiang Lichuan Bridge (No. R-[2014]26-624) |
|
Corresponding Authors:
ZHANG Kai,E-mail:ismaelz@163.com
E-mail: ismaelz@163.com
|
|
|
|
[1] CHEN Kai-li, YU Tian-qing, XI Gang. Development and Prospect of Hybrid Cable-stayed Bridges[J]. Bridge Construction, 2005(2):1-4. (in Chinese)
[2] LIU Yu-qing. Development of Design Technique for Joint Parts of Hybrid Girder[J]. World Bridge,2005(4):9-12. (in Chinese)
[3] LIU An-shuang, LIU Xue-shan, DAI Tong, et al. Design of Steel and Concrete Joint Parts of Dauble-line Bridge of Changjiang River Bridge in Chongqing[J]. Bridge Construction, 2007(2):35-38. (in Chinese)
[4] LIU Ming-hu, XU Guo-ping, LIU Feng. Study and Design of Steel-concrete Joint Part of Hybrid Girder of Edong Bridge[J]. Journal of Highway and Transportation Research and Development, 2010,27(12):78-85. (in Chinese)
[5] ZHANG Qi-zhi, WU Bao-shi. Model Test Study of Steel and Concrete Joint Section of Jiujiang Changjiang River Highway Bridge[J]. Bridge Construcion, 2013, 43(5):68-74.(in Chinese)
[6] LIU Cheng-yu, ZHAO Ting-heng. Design of Steel-concrete Connection Joint of Queshi Bridge[C]//Proceedings of Thirteenth Annual Conference of Bridge and Structural Engineering Society of China Civil Engineering Society. Shanghai:Bridge and Structural Engineering Society of China Civil Engineering Society, 1998:304-308.(in Chinese)
[7] CHEN Kai-li, WANG Jie-zao, AN Qun-hui. Model Tests on Steel-concrete Joining Section of Main Girder of a Cable-stayed Bridge[J]. Journal of Civil Engineering, 2006, 39(3):86-90. (in Chinese)
[8] PU Huai-ren. Design of the Joint Part of Steel-concrete Mixed Girder Bridge of Pingsheng-bridge of Guangdong[J]. Highway Engineering,2011,36(3):90-94.(in Chinese)
[9] ZHANG Guo-quan, DAI Shao-xiong. Stress Analysis of Steel-concrete Combined Sections in a Cable Stayed Bridge with Single Tower[J]. Structural Engineers, 2007, 23(3):26-30.(in Chinese)
[10] WEN Wu-song, WANG Shuang-yan, WANG Bang-mei. Load Transmission Study of Connections in Hybrid Cable Stayed Bridge[J]. Bridge Construction, 1997(3):75-81.(in Chinese)
[11] HU Jian-hua, HOU Wen-qi, HUANG Qiong. Experimental Study of Different Structure Forms of Steel-concrete Joint Section of Hybrid Self-anchored Suspension Bridge[J]. Journal of Railway Science and Engineering, 2007,4(5):28-34.(in Chinese)
[12] ZHANG Xi-gang, WU Wen-ming, LIU Gao. Mechanical Model and Simplified Calculation Method Steel-concrete Connection Joint with Full-connection Bearing-plates[J].Journal of Highway and Transportation Research and Development, 2013, 12(10):49-53. (in Chinese)
[13] WU Wen-ming,LIU Gao, XU Guo-ping, et al, Structural Characteristics of Steel-concrete Connection Joint with Full-connection Bearing-plate Type[J]. Journal of Highway and Transportation Research and Development, 2010, 27(3):75-80. (in Chinese)
[14] XIN H, LIU Y, HE J, et al. Experimental and Analytical Study on Stiffened Steel Segment of Hybrid Structure[J]. Journal of Constructional Steel Research, 2014, 100:237-258.
[15] DUNAI L, FUKUMOTO Y, OHTANI Y. Behaviour of Steel-to-concrete Connections under Combined Axial Force and Cyclic Bending[J]. Journal of Constructional Steel Research,1996, 36(2):121-147.
[16] KIM S, LEE C, AHN J, et al. Experimental Study on Joint of Spliced Steel-PSC Hybrid Girder, Part I:Proposed Parallel-Perfobond-rib-type Joint[J]. Engineering Structures, 2011, 33(8):2382-2397.
[17] KIM S, LEE C, KIM S, et al. Experimental Study on Joint of Spliced Steel-PSC Hybrid Girder, Part II:Full-scale Test of Spliced Hybrid I-Girder[J]. Engineering Structures, 2011, 33(9):2668-2682.
[18] KIM S E, NGUYEN H T. Finite Element Modeling and Analysis of a Hybrid Steel-PSC Beam Connection[J]. Engineering Structures, 2010, 32(9):2557-2569.
[19] GUO Jin-qiong, FANG Zhen-zheng, ZHENG Zhen. Design Theory for Box Girder[M]. Beijing:China Communications Press, 2008. (in Chinese) |
| [1] |
CHANG Zhu-gang, WANG Lin-kai, XIA Fei-long. Fluid-structure Interaction Numerical Simulation of Bridge Wind-induced Vibration Based on CV Newmark-β Method[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 28-37. |
| [2] |
XU Bai-shun, YAO Chao-yi, YAO Ya-dong, QIAN Yong-jiu, MA Ming. Carbon Fiber Reinforced Polymer-to-steel Interfacial Stress Parameter Sensitivity Based on Viscoelastic Constitutive[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 20-27. |
| [3] |
WEN Cheng, ZHANG Hong-xian. Influence of Material Time-dependent Performance on the Cantilever Construction of PSC Box Girder Bridge[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 38-44. |
| [4] |
LU Guan-ya, WANG Ke-hai, ZHANG Pan-pan. Seismic Design and Evaluation Methods for Small-to-Medium-Span Highway Girder Bridges Based on Machine Learning and Earthquake Damage Experience[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 24-37. |
| [5] |
YANG Yi-ming, PENG Jian-xin, ZHANG Jian-ren. Random Field Parameter Estimation of Service Bridge Component and Comparative Analysis of Estimation Methods[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 38-49. |
| [6] |
ZHAN Jian, SHAO Xu-dong, QU Wan-tong, CAO Jun-hui. Multi-parameter Fatigue Analysis of a Steel-super Toughness Concrete Lightweight Composite Bridge Deck[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 50-59. |
|
|
|
|
2016, Vol. 10 
