|
|
|
| Design of a Rut-resistant Asphalt Mixture Using the Simplified Multilevel Mixing Method |
| CAI Xu1,2, ZHU Feng-dan1, WANG Duan-yi2, WU Kuang-huai1, YANG Guo-liang1 |
1. School of Civil Engineering, Guangzhou University, Guangzhou Guangdong 510001, China;
2. School of Civil Engineering and Transportation, South China University of Technology, Guangzhou Guangdong 510640, China |
|
|
|
|
Abstract The multilevel mixing method for aggregate gradation design was optimized based on the division of the functions of coarse and fine aggregates. The mixing procedures were simplified. The mixing process for fine aggregates was omitted to avoid segregation during the mixing process for coarse and fine aggregates. The calculation method for the ratio of coarse aggregates to fine aggregates was redesigned to consider the volume interference of mineral powder. The volume relationship between mineral powder and asphalt was established by controlling their ratio. Accordingly, the optimal asphalt aggregate ratio was obtained to guarantee the anti-rutting performance of the mixture. The performances of the mixtures designed using this new method were verified via the Marshall stability test, and their rut-resistant capabilities were compared with those of the AC-13 and SMA-13 asphalt mixtures. Results show that the technical indicators of the MLB-13 mixture fulfill the relevant requirements of the standard and demonstrate reasonable rut-resistant performance.
|
|
Received: 10 June 2016
|
| Fund:Supported by the Natural Science Foundation of Guangdong Province (No. 2014A030310272) |
|
Corresponding Authors:
CAI Xu,E-mail:cx_caixu@163.com
E-mail: cx_caixu@163.com
|
|
|
|
[1] FULLER W B,THOMPSON S E.The Laws of Proportion-ing Concrete[J].Transactions American Society of Civil Engineers,1907,59(2):67-143.
[2] YAGHOUBI E,MANSOURKHAKI A.Effect of "n" Exponent in Fuller Equation of Gradation on Hot Mix Asphalt Resistance to Permanent Deformation[J].International Journal of Pavement Research and Technology,2010,3(6):336-342.
[3] ZHU Zhao-hong,XU Zhi-hong.Design Theory and Method of Flexible Pavement[M].Shanghai:Tongji University Press,1987.(in Chinese)
[4] WANG Li-jiu,LIU Hui.Current Status and Future Trends of Aggregate Grading Design Theory[J].Highway,2008(1):170-174.(in Chinese)
[5] LIN Xiu-xian.Calculation Formula for Reasonable Aggregates Composition of Asphalt Mixture[J].East China Highway,2003(1):82-84.(in Chinese)
[6] WEYMOUTH C A G.A Study of Fine Aggregate in Freshly Mixed Mortars and Concretes[C]//Proceedings of American Society for Testing and Materials Part II.West Conshohocken,PA:ASTM,1938:354-357.
[7] ZHANG Xiao-ning,GUO Zu-xin,WU Kuang-huai.Volume Method of Bituminous Mixture Design[J].Journal of Harbin University of Civil Engineering and Architecture,1995,28(2):28-35.(in Chinese)
[8] VAVRIK W R,PINE W J,HUBER G,et al.The Bailey Method of Gradation Evaluation:the Influence of Aggregate Gradation and Packing Characteristics on Voids in the Mineral Aggregate[J].Journal of the Association of Asphalt Paving Technologists,2001,70:1-5.
[9] PANG Yan-zhu,WANG Duan-yi.Dynamic Modulus Prediction Model of ATPB Mixture[J].Journal of South China University of Technology:Natural Science Edition,2011,39(8):129-132.(in Chinese)
[10] YU Jiang-miao,ZHAN Xiao-li,LU Liang,et al.Optimal Design for Rut Resistance of Asphalt Mixture[J].Journal of Highway and Transportation Research and Development,2009,26(9):1-5.(in Chinese)
[11] LU Liang.Study on Functional Asphalt Mixture and Design Method[D].Guangzhou:South China University of Technology,2009.(in Chinese)
[12] LEES G.The Rational Design of Aggregate Gradings for Dense Asphaltic Compositions[C]//Proceedings of Asphalt Paving Technologies.Kansas City,US:Asphalt Paving Technologies,1970:60-90.
[13] XU Zhi-hong,CHEN Xing-wei,LIU Hong,et al.Gradation Scope of Superpave[J].Journal of Traffic and Transportation Engineering,2003,3(3):1-5.(in Chinese)
[14] ZHANG Zheng-qi,ZHANG Wei-ping,LI Ping.Ratio of Filler Bitumen of Asphalt Mixture[J].Journal of Chang'an University:Natural Science Edition,2004,24(5):7-10.(in Chinese) |
| [1] |
LI Ning, MA Biao, LI Rui, SI Wei. Performance of Unbound Aggregate Materials under Single-stage and Multi-stage Loading Modes Based on Precision Unbounded Material Analyzer[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 1-12. |
| [2] |
XU Hai-liang, REN He-huan, HE Zhao-cai, HE Lian. Time-domain Analysis of Deformation Characteristics of Asphalt Concrete Pavement Considering Vehicle-pavement Coupled Effect[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 13-19. |
| [3] |
DU Jian-huan, AI Chang-fa, HUANG Chao, GUO Yu-jin, JIANG Yun-bing. Effect of Interfacial Water on the Fatigue Performance of Composite Asphalt Mixture Beams[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 1-7. |
| [4] |
YAO Guo-qiang, YAN Zhi-xin, LONG Zhe, ZHAI Ju-yun. Simulation Experimental Study on Shear Stress Distribution of Rock Slope Anchoring Interface[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 8-15. |
| [5] |
LIU Ze, HE Fan, HUANG Tian-qi, JIANG Mei-dong. Additional Earth Pressure of Retaining Wall Caused by Vehicle Load[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 16-23. |
| [6] |
QIU Xin, XU Jing-xian, TAO Jue-qiang, YANG Qing. Asphalt Pavement Icing Condition Criterion and SVM-based Prediction Analysis[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 1-9. |
|
|
|
|
2016, Vol. 10 
