Study on Stability Numerical Simulation of Limestone Slope Based on Ground Penetrating Radar and Displacement Back Analysis
温世儒1, 吴霞2
1. School of Civil and Surveying & Mapping Engineering, Jiangxi University of Science and Technology, Ganzhou Jiangxi 341000, China; 2. School of Architecture Engineering, Jiangxi College of Applied Technology, Ganzhou Jiangxi 341000, China
Study on Stability Numerical Simulation of Limestone Slope Based on Ground Penetrating Radar and Displacement Back Analysis
WEN Shi-ru1, WU Xia2
1. School of Civil and Surveying & Mapping Engineering, Jiangxi University of Science and Technology, Ganzhou Jiangxi 341000, China; 2. School of Architecture Engineering, Jiangxi College of Applied Technology, Ganzhou Jiangxi 341000, China
摘要The overall dissolution and weathering of limestone slope have significant temporal and spatial variability, so it is difficult to obtain the mechanical parameters of complete slope accurately and effectively according to conventional specifications, and the reliability of the numerical simulation result would be weaken or even to be completely invalid, and it is difficult to provide effective reference information for field construction. Therefore, a method for obtaining the mechanical parameters of slope based on GPR and displacement back analysis is proposed. On the basis of a limestone slope in No. 2 section of Yizhou-Hechi expressway in Guangxi, the water-rich and crushing properties of the slope are detected by GPR, and the slope is divided into different graded units. Then, a displacement gauge is installed on the non-cavity unit block to measure the displacement value of the unit block, and the mechanical parameters such as elastic modulus, poison’s ratio and cohesive force of different unit blocks are obtained by using BMP90 displacement back analysis method accordingly. The grid model of complete slope is established by using MIDAS-GTS finite element numerical simulation software, and the sliding displacement value of the slope is calculated by using the mechanical parameters of different unit blocks obtained by back analysis and the whole assignment of specification. In order to compare and verify the numerical simulation result of the sliding displacement value, the field synchronous monitoring and measurement of the displacement is carried out. Compared with the results of synchronous field displacement monitoring and measurement, it is found that the numerical simulation values based on slope unit division and its back analysis result are close to the monitored values, which indicates that the mechanical parameters obtained by this method are more consistent with the real values of slope than the mechanical parameters of complete slope generally assigned according to the specification. The study can provide relevant reference for numerical simulation analysis of limestone slope stability in dissolved areas.
Abstract：The overall dissolution and weathering of limestone slope have significant temporal and spatial variability, so it is difficult to obtain the mechanical parameters of complete slope accurately and effectively according to conventional specifications, and the reliability of the numerical simulation result would be weaken or even to be completely invalid, and it is difficult to provide effective reference information for field construction. Therefore, a method for obtaining the mechanical parameters of slope based on GPR and displacement back analysis is proposed. On the basis of a limestone slope in No. 2 section of Yizhou-Hechi expressway in Guangxi, the water-rich and crushing properties of the slope are detected by GPR, and the slope is divided into different graded units. Then, a displacement gauge is installed on the non-cavity unit block to measure the displacement value of the unit block, and the mechanical parameters such as elastic modulus, poison’s ratio and cohesive force of different unit blocks are obtained by using BMP90 displacement back analysis method accordingly. The grid model of complete slope is established by using MIDAS-GTS finite element numerical simulation software, and the sliding displacement value of the slope is calculated by using the mechanical parameters of different unit blocks obtained by back analysis and the whole assignment of specification. In order to compare and verify the numerical simulation result of the sliding displacement value, the field synchronous monitoring and measurement of the displacement is carried out. Compared with the results of synchronous field displacement monitoring and measurement, it is found that the numerical simulation values based on slope unit division and its back analysis result are close to the monitored values, which indicates that the mechanical parameters obtained by this method are more consistent with the real values of slope than the mechanical parameters of complete slope generally assigned according to the specification. The study can provide relevant reference for numerical simulation analysis of limestone slope stability in dissolved areas.
基金资助:Supported by the National Natural Science Foundation of China (No.41272285)and the Science and Technology Research Project of Jiangxi Education Department (Nos.GJJ170564, GJJ204903)
通讯作者:
WEN Shi-ru
引用本文:
温世儒, 吴霞. Study on Stability Numerical Simulation of Limestone Slope Based on Ground Penetrating Radar and Displacement Back Analysis[J]. Journal of Highway and Transportation Research and Development, 2022, 16(4): 23-32.
WEN Shi-ru, WU Xia. Study on Stability Numerical Simulation of Limestone Slope Based on Ground Penetrating Radar and Displacement Back Analysis. Journal of Highway and Transportation Research and Development, 2022, 16(4): 23-32.
[1] DING Chen. Karst Development Law of Huashan Town and Huadong Town in Huadu District of Guangzhou City[J]. The Chinese Journal of Geological Hazard and Control, 2020, 31(6):122-129.(in Chinese) [2] ZHU Chuan-qu, HUANG You-jin, ZHOU Ze, et al. The Karst Cave Detection and Its Collapse Generalized Model under the Effects of Mining in Pinghu Coal Mine[J]. Journal of Hunan University of Science & Technology(Natural Science Edition), 2018,33(4):7-13. (in Chinese) [3] ZHANG Can-can. Study on Stability of the Shahu Mountain Landslide Based on FLAC3D Numerical Simulation[J]. Journal of Hebei GEO University, 2019, 42(4):56-59. (in Chinese) [4] WAN Liang, YANG He-ping. Numerical Simulation of Pullout Test Value of Geogrid Reinforced Expansive Soil[J]. Journal of Highway and Transportation Research and Development, 2020, 37(2):31-39. (in Chinese) [5] LING Tong-hua, QIN Jian, SONG Qiang, et al. Intelligent Displacement Back-analysis Based on Improved Particle Swarm Optimization and neural Network and Its Application[J]. Journal of Railway Science and Engineering, 2020, 17(9):2181-2190. (in Chinese) [6] XU Zhong-hua, LI Jing, WANG Wei-dong. Back Analysis of the m Values in Vertical Elastic Subgrade Beam Method for Deep Excavations[J]. Building Structure, 2020, 50(S1):1000-1006. (in Chinese) [7] CAUDAL P, GRENON M, TURMEL D, et al. Analysis of a Large Rock Slope Failure on the East Wall of the LAB Chrysotile Mine in Canada:LiDAR Monitoring and Displacement Analyses[J]. Rock Mechanics and Rock Engineering, 2017, 50(4):807-824. [8] ZHANG Ji-xun, YANG Fan, REN Xu-hua, et al. Back Analysis of Surrounding Rock Mechanical Parameters of Underground Caverns Based on Genetic Algorithm[J]. Modern Tunnelling Technology, 2018, 55(6):53-58. (in Chinese) [9] MOTAHARE M, RAJABI A. Application of Numerical Back Analysis for Determination of Soil Mass Specifications During Tunnel Construction[J]. Arabian Journal of Geosciences, 2020, 13(19):605-1306. [10] PU Y Y, APEL D B., PRUSEK S, et al. Back-analysis for Initial Ground Stress Field at a Diamond Mine Using Machine Learning Approaches[J]. Natural Hazards, 2020, 105(1):191-203. [11] NA Qi-cai, GUO Hong-yan, HU Ju-yi, et al. Surrounding Rock Mechanical Parameters Test and Back Analysis of Carbonaceous Shale Tunnel[J]. Chinese Journal of Underground Space and Engineering, 2016, 12(S2):504-509. (in Chinese) [12] PENG Y X, WU L, PENG H H, et al. Theoretical and Experimental Study on Rock Resistance Coefficient of Soft Rock Tunnel Considering Creep Effect[J]. Arabian Journal for Science and Engineering, 2020, 45(2):4333-4342. [13] BU A M, ZHANG Y F, XIANG Y, et al. Formation of Laminated Nano-coatings for Enhanced Anti-oxidation and Electromagnetic Wave Absorbing Properties of Carbon Fiber[J]. Journal of Materials Research and Technology, 2020, 9(4):9153-9161. [14] WEN Shi-ru, YANG Xiao-hua, GUO Yuan-shu. Interpretation Based on Frequency Spectrum Energy Analysis of Ground Penetrating Radar Detection Image[J]. Advanced Engineering Sciences, 2020, 52(6):120-130. (in Chinese) [15] WEN Shi-ru, WU Xia. Detection Applicability of the Ground Penetrating Radar in Coarse Grained Mixed Sodium Saline Soil[J]. Geology and Exploration,2020,56(5):1031-1039. (in Chinese) [16] WU Xia, WEN Shi-ru, YAN Chang-gen, et al. Study on Waveform and Frequency Spectrum Property of GPR for Limestone with Different Weathering Degree[J]. Journal of Southwest University (Natural Science Edition), 2016, 38(6):159-164. (in Chinese) [17] PENG Xin-jian, WENG Xiao-xiong. Bus Travel Time Prediction Based on BP Neural Network Optimized by Firefly Algorithm[J]. Journal of Guangxi Normal University (Natural Science Edition), 2017, 35(1):28-36. (in Chinese) [18] WU Xia, LAI Yun, ZHAO Feng-juan. Application of Displacement Back Analysis in Finite Element Numerical Calculation of Tunnel Project[J]. Journal of Nanchang Institute of Technology, 2019, 38(1):46-49, 73. (In Chinese) [19] GE Hui. Finite Elements Analysis of Asphalt Pavement with Crack Under Dynamic Loading[J]. Journal of Chengdu University (Natural Science Edition), 2020, 39(4):437-443. (in Chinese) [20] XIE Shu-meng. Investigation on Influence of Underlying Karst on Bearing Capacity of Pile Foundation by Finite Difference Method[J].Journal of Yangtze River Scientific Research Institute, 2019,36(4):77-81. (in Chinese)
2022, Vol. 16 
