摘要The thickness of the loose circle of surrounding rock is an important index in tunnel support parameter design and rock mass stability evaluation. Accurate and rapid determination of thickness is critical to ensure the safety of underground chamber construction. Field test is the most intuitive and accurate method for thickness determination. Acoustic method is also widely used because of its high precision, low cost, and simple operation. However, existing discriminative standards for analysis of test results are ambiguous and subjective; as such, a uniform standard that defines a loose circle has not been established yet. In this study, the complete degree of rock and loose rock mass is quantitatively analyzed by introducing the concept of and the calculation formula for the integrity coefficient of broken rock (Rv) and the integrity coefficient of loose circle (Lv). According to the formation principle of loose circle, the criteria and test method for surrounding rock loose circle are proposed on the basis of the integrity coefficient. The integrity coefficient of the loose circle (Rv) is assumed to be approximately equal to that of the broken rock (Lv) in chamber excavation. In the test of the surrounding rock loose circle in the Shimen tunnel at Baohan highway, the integrity coefficient (Rv) of the rock of the grade Ⅲ gneiss was 0.53 according to the combined indoor and field tests. The thickness of the type Ⅲ surrounding rock loose circle was 0.55-1.35 m, and the distribution along the circumference was not uniform. The arch shoulder was thick, and the wall was thin, consistent with the initial stress state of the surrounding rock. Comparison with the results of the original acoustic wave loosening test showed that the new discriminant method based on the integrity coefficient is more accurate and reliable. The proposed method could be used for the design and construction of tunnels.
Abstract：The thickness of the loose circle of surrounding rock is an important index in tunnel support parameter design and rock mass stability evaluation. Accurate and rapid determination of thickness is critical to ensure the safety of underground chamber construction. Field test is the most intuitive and accurate method for thickness determination. Acoustic method is also widely used because of its high precision, low cost, and simple operation. However, existing discriminative standards for analysis of test results are ambiguous and subjective; as such, a uniform standard that defines a loose circle has not been established yet. In this study, the complete degree of rock and loose rock mass is quantitatively analyzed by introducing the concept of and the calculation formula for the integrity coefficient of broken rock (Rv) and the integrity coefficient of loose circle (Lv). According to the formation principle of loose circle, the criteria and test method for surrounding rock loose circle are proposed on the basis of the integrity coefficient. The integrity coefficient of the loose circle (Rv) is assumed to be approximately equal to that of the broken rock (Lv) in chamber excavation. In the test of the surrounding rock loose circle in the Shimen tunnel at Baohan highway, the integrity coefficient (Rv) of the rock of the grade Ⅲ gneiss was 0.53 according to the combined indoor and field tests. The thickness of the type Ⅲ surrounding rock loose circle was 0.55-1.35 m, and the distribution along the circumference was not uniform. The arch shoulder was thick, and the wall was thin, consistent with the initial stress state of the surrounding rock. Comparison with the results of the original acoustic wave loosening test showed that the new discriminant method based on the integrity coefficient is more accurate and reliable. The proposed method could be used for the design and construction of tunnels.
基金资助:Supported by the National Natural Science Foundation of China(No.51679199); the Natural Science Basic Research Program of Shaanxi Province(No.2017JM5136); the Key Laboratory Program of Shaanxi Provincial Science and Technology Innovation(No.2014SZS15-Z01); Xi'an Technological University President Fund (XAGDXJJ16003)
通讯作者:
MENG Yao-yao
E-mail: 15291831068@163.com
引用本文:
孟尧尧, 薛山, 王睿, 邓祥辉. 基于完整性系数的声波法围岩松动圈测试研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(2): 67-72.
MENG Yao-yao, XUE Shan, WANG Rui, DENG Xiang-hui. Acoustic Method Based on Integrity Coefficient for Testing the Loose Circle of Surrounding Rock. Journal of Highway and Transportation Research and Development, 2018, 12(2): 67-72.
[1] ZHAO Yong,TIAN Si-ming,SUN Yi. Development and Planning of High-speed Railway Tunnels in China[J]. Tunnel Construction, 2017, 1(1):11-17. (in Chinese)
[2] LIU Xue-zeng, SU Yun-fang. Study on Rock Burst Safety Evaluation Quantitative Index System for Tunneling[J]. Journal of Highway and Transportation Research and Development, 2010, 27(11):88-93. (in Chinese)
[3] DONG Fang-ting, SONG Hong-wei, GUO Zhi-hong, et al. Tunnel Wall Rock Loose Circle Support Theories[J]. Journal of China Coal Society, 1994, 19(1):21-31. (in Chinese)
[4] GUO Jiang-tao. Composite Support Technology of Soft Coal Roadway With Large Loose Zone[J]. Coal Engineering, 2016, 48(11):35-37,41. (in Chinese)
[5] LIN Ye-cheng,HE Fa-yun,PENG Hong-yan,et al. Determination of Broken Rock Zone of Roadway and Analysis of Its Influence Factors[J]. Industrial Minerals and Processing, 2016, (10):34-37, 41. (in Chinese)
[6] CHEN Gen-ma, CAO Chang-jiang,LU Quan-ti. Bolting Support Grouting Cooperating Support Technology of Fractured Surrounding Rock Roadway in Large Loose Circle[J]. Coal Science and Technology, 2015, (9):134-138, 104. (in Chinese)
[7] LU Hong-jian, GAO Yong-tao, GAN De-qing. Occurrence and Control Mechanisms of Slope Crack at Tunnel Entrance[J]. Journal of Highway and Transportation Research and Development, 2013, 30(2):69-76. (in Chinese)
[8] WANG Zi-jiang. Research on Macroscopical Quantitative Relation Between Wave Velocityand Strength of Rock:Rock Mass[J]. Journal of Railway Engineering Society, 2001,(10):6-9. (in Chinese)
[9] CAO Ping, CHEN Chong, ZHANG Ke, et al. Measurement and Analysis of Deep Roadway Surrounding Rock Loose Zone in Jinchuan Mine[J].Journal of Central South University:Science and Technology,2014,45(8):2839-2844. (in Chinese)
[10] ZHANG Hai-lei, LIU Tao, GUO Sheng-mao, et al. Loose Circle Distribution Survey of Roadway Surrounding Rock of Isolation Pillar[J]. Metal Mine, 2014,(7):151-155. (in Chinese)
[11] WU Qing-dong. Estimation of the Surrounding Rock Loosen Zone Thickness of an Underground Crude Oil Storage Caverns[J]. Soil Engineering and Foundation, 2014, 27(2):128-131. (in Chinese)
[12] ZHANG Xiao-yu,LI Zhe,ZHU Shi-an. Support Technique of Deep Soft Rock Roadway Based on Loose Circle Test of Surrounding Rock[J]. Safety in Coal Mines, 2016, 47(5):94-100. (in Chinese)
[13] HUANG Feng, ZHU He-hua, LI Qiu-shi, et al. Field Detection and Theoretic Analysis of Loose Circle of Rock Mass Surrounding Tunnel[J]. Rock and Soil Mechanics, 2016, 37(S1):145-150. (in Chinese)
[14] DAI Jun,YANG Fan,WU Yu,et al. Application of RSMSY5(N) Acoustic Waves Monitor in Releasing Zone Measuring and Test[J]. Coal Technology, 2014, 33(12):76-78. (in Chinese)
[15] WU Tao,DAI Jun,DU Mei-li,et al. Surrounding Rock Loosing Circle Test Based on Acoustic Test Technology[J]. Safety in Coal Mines, 2015, 46(1):169-172. (in Chinese)
[16] LI Ping-hong,CHEN Zong-gang,XUE You-ping,et al. An Example of Detection by Ultrasonic Wave Through Long-term Observation Hole in Loose Ring of Large-Diameter Tunnel Excavated by Drilling and Basting Method[J]. Northwest Hydropower, 2012, (3):9-12. (in Chinese)
[17] GB/T 50266-2013, Standard for Test Methods of Engineering Rock Mass[S]. (in Chinese)
[18] ZHANG Peng-hai,YANG Tian-hong,ZHAO Yong-chuan, et al.Variation Characteristics of Wave Velocity During Rock Failure Process[J]. Journal of Northeastern University:Natural Science, 2015, 36(1):134-137. (in Chinese)
[19] JTG/T D70-2010, Guidelines for Design of Highway Tunnel[S]. (in Chinese)
2018, Vol. 12 
