摘要Pile side friction is an important component of the bearing capacity of socketed piles, and plays a crucial role in improving the vertical bearing capacity of socketed piles. In order to study the load-bearing mechanism of socketed piles, on the study background of on-site monitoring of the bearing capacity of socketed piles of Qingchi Grand Bridge on Guiyang-Jinsha-Gulin Expressway, the development mechanism of pile side friction under construction loads is analyzed. Based on the shear characteristics of the pile-rock interface of socketed pile and theoretical analysis, the expressions of pile side friction and shear displacement are derived. A load transfer model of socketed pile is established based on the load transfer theory, and the model is solved by using the 4th-order Runge-Kutta method through Python. The on-site monitoring data of engineering piles are in accordance with the calculation result, indicating the correctness of the established load transfer model and the rationality of the calculation method, which can be used for study the mechanism of side friction of socketed piles. According to the monitoring data and the load transfer model, the characteristics of the axial force and shear displacement of the pile foundation section in the shear slip stage under different construction loads are analyzed. The result shows that (1) Under construction loads, the pile side friction of socketed pile plays a role from top to bottom gradually and bears most of the construction loads. (2) When the shear displacement reaches the ultimate shear displacement, the pile side friction remains stable gradually, and the construction loads are borne by the pile end resistance gradually. (3) The sectional axial force of socketed pile calculated by using the load transfer model is in accordance with the monitoring result, upon that the established load transfer model and calculation method have practical engineering significance. (4) The calculated ultimate pile end resistance is significantly smaller than that calculated according to the Design Specification for Highway Bridges and Culverts Foundations (JTG 3363—2019). This indicates that the original design of the ultimate pile end resistance is overly conservative and needs to be reasonably revised.
Abstract：Pile side friction is an important component of the bearing capacity of socketed piles, and plays a crucial role in improving the vertical bearing capacity of socketed piles. In order to study the load-bearing mechanism of socketed piles, on the study background of on-site monitoring of the bearing capacity of socketed piles of Qingchi Grand Bridge on Guiyang-Jinsha-Gulin Expressway, the development mechanism of pile side friction under construction loads is analyzed. Based on the shear characteristics of the pile-rock interface of socketed pile and theoretical analysis, the expressions of pile side friction and shear displacement are derived. A load transfer model of socketed pile is established based on the load transfer theory, and the model is solved by using the 4th-order Runge-Kutta method through Python. The on-site monitoring data of engineering piles are in accordance with the calculation result, indicating the correctness of the established load transfer model and the rationality of the calculation method, which can be used for study the mechanism of side friction of socketed piles. According to the monitoring data and the load transfer model, the characteristics of the axial force and shear displacement of the pile foundation section in the shear slip stage under different construction loads are analyzed. The result shows that (1) Under construction loads, the pile side friction of socketed pile plays a role from top to bottom gradually and bears most of the construction loads. (2) When the shear displacement reaches the ultimate shear displacement, the pile side friction remains stable gradually, and the construction loads are borne by the pile end resistance gradually. (3) The sectional axial force of socketed pile calculated by using the load transfer model is in accordance with the monitoring result, upon that the established load transfer model and calculation method have practical engineering significance. (4) The calculated ultimate pile end resistance is significantly smaller than that calculated according to the Design Specification for Highway Bridges and Culverts Foundations (JTG 3363—2019). This indicates that the original design of the ultimate pile end resistance is overly conservative and needs to be reasonably revised.
王开源, 申波, 赵晓林. Analysis of the Bearing Capacity of Rock-Socketed Piles in Mountain Area by the Load Transfer Theory[J]. Journal of Highway and Transportation Research and Development, 2023, 17(2): 18-29.
WANG Kai-yuan, SHEN Bo, ZHAO Xiao-lin. Analysis of the Bearing Capacity of Rock-Socketed Piles in Mountain Area by the Load Transfer Theory. Journal of Highway and Transportation Research and Development, 2023, 17(2): 18-29.
[1] SEIDEL J P, COLLINGWOOD B. A New Socket Roughness Factor for Prediction of Rock Socket Shaft Resistance[J]. Canadian Geotechnical Journal, 2001,38(1): 138-153. [2] ZHOU De-quan, ZHANG Yang-long, CAO Yong, et al. Test on Influence Law of Karst Cave Height on Axial Force Transfer and Lateral Overload Response of Rock-socketed Pile[J]. Journal of Hunan University (Natural Sciences), 2022, 49(7): 83-93. (in Chinese) [3] ZHAO Ming-hua, XIA Bo-yang, ZHAO Heng. Laboratory Testing Study on Concrete-rock Interface with Sawtooth Join[J]. Journal of Hunan University (Natural Sciences), 2020, 47(1): 123-129. (in Chinese) [4] ZHAO Ming-hua, WU Wen, CHEN Yan-zhang. Study on Stability of Karst Cave Roof Considering Side Friction Resistance of Rock-socketed Section[J] Journal of Highway and Transportation Research and Development, 2018, 35(8): 73-79. (in Chinese) [5] ZHANG Q, MA B, LIU S, et al. Behaviour Analysis on the Vertically Loaded Bored Pile Socketed into Weak Rocks Using Slip-line Theory Arc Failure Surface[J]. Computers and Geotechnics, 2020, 128:1-10. [6] HOU J, ZHAO H, PENG W, et al. A Limit Solution for Predicting Side Resistance on Rock-socketed Piles[J]. Journal of Engineering Mechanics, 2022, 148(1): 1-14. [7] WANG Guang-bing, LU Hong-qian, ZHANG Yuan, et al. Research on Vertical Static Load Test of Single Pile of Rock-socketed Cast-in-place Pile[J]. Engineering Journal of Wuhan University, 2021(S2): 247-251. (in Chinese) [8] WANG T, ZHANG L, HAO Y, et al. Side Friction of Rock-socketed Piles Involving Thick Sediment[J]. Advances in Civil Engineering, 2020(2): 1-13. [9] GUTIÉRREZ-CH J G, SENENT S, MELENTIJEVIC S, et al. A DEM-based Factor to Design Rock-socketed Piles Considering Socket Roughness[J]. Rock Mechanics and Rock Engineering, 2021,54: 3409-3421. [10] XING X, LI X, LI W, et al. Numerical Analysis of the End-suspended Pile and the Rock-s ocketed Pile Bearing Capacity of a Soil-r ock Composite Foundation Pit[J]. Advances in Civil Engineering, 2022,2022: 1199548. [11] HU Min-yun, LU Yu-ke, CHEN Xiao-yu, et al. Settlement of Piled Raft Foundation Embedded in Rock and Its Calculation Method[J]. Chinese Journal of Geotechnical Engineering, 2019(S2): 221-225. (in Chinese) [12] ZHOU Jia-quan, ZHOU Chuan-bo, WU Wen-bing, et al. Bearing Characteristics of Soft Rock-s ocketed Piles with Effect of Pile-rock Interface Cementation[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2019, 47(11): 43-48. (in Chinese) [13] ZHAO Ming-hua, LEI Yong, LIU Xiao-ming. Analysis of Load Transfer of Rock-socketed Piles Based on Characteristics of Pile-rock Structural Plane[J]. Chinese Journal of Rock Mechanics and Engineering, 2009, 28(1): 103-110. (in Chinese) [14] JTG 3363—2019, Design Specification for Highway Bridges and Culverts Foundations[S]. (in Chinese) [15] JOHNSTON I W, LAM T S, WILLIAMS A F. Constant Normal Stiffness Direct Shear Testing for Socketed Pile Design in Weak Rock[J]. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts,1987,37(1): 83-89. [16] LEI Yong, YIN Jun-fan, CHEN Qiu-nan. Experimental Study on Load Bearing Characteristic of Rock-socketed Segment in Pile[J]. Journal of Highway and Transportation Research and Development, 2016, 33(10): 73-80. (in Chinese) [17] ZHAO H, HOU J, ZHANG L, et al. Towards Concrete-rock Interface Shear Containing Similar Triangular Asperities[J]. International Journal of Rock Mechanics and Mining Sciences, 2021,137(5):104547. [18] PATTON F D. Multiple Modes of Shear Failure in Rock[C]// 1st ISRM Congress, Lisbon: ISRM Congress, 1966. [19] YE Qi-xiao, SHEN Yong-huan. Handbook of Practical Mathematics[M]. Beijing: Science Press, 2006. (in Chinese) [20] LIU Ya-nan, ZHAO Heng, ZHAO Ming-hua, et al. Vertical Load Transfer Behavior of Cast-in-place Piles Considering Hole Wall Asperity Degradations[J]. Journal of Hunan University (Natural Sciences), 2021, 48(11): 160-165. (in Chinese)
2023, Vol. 17 
